Replacement Aluminum Gearbox for Stromberg Carlson Landing Gear
(132 reviews)
Price: $63.27
In Stock
Replacement Aluminum Gearbox for Stromberg Carlson Landing Gear
Item # LG-179015
Retail:$89.63
Our Price: $63.27
You Save: 29%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (132)
- Q & A (0)
- Videos (1)
- Photos
Stromberg Carlson Accessories and Parts - LG-179015
- Camper Jacks
- Trailer Jack
- Motor and Gear Parts
- Gearbox
- Stromberg Carlson
Replaces the damaged aluminum gearbox for your Stromberg Carlson landing gear (LG-1, LG-2, LG-3, LG-4, or LG-183708).
Features:
- Replaces the gearbox for your tandem landing gear
- Designed for use with Stromberg Carlson landing gear (LG-1, LG-2, LG-3, LG-4, or LG-183708)
- Also works with most other brands of landing gear, including Lippert, and Venture
- Constructed of durable, rustproof aluminum
- Accepts a D-shaped pin
- Measures 6-1/2" long x 5-1/2" wide x 7" tall
LG-179015 Stromberg Carlson Replacement Aluminum LG Gear Box for Fifth Wheel Landing Gear
California residents: click here
Video of Replacement Aluminum Gearbox for Stromberg Carlson Landing Gear
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Stromberg Carlson Trailer Jack LG-179015 Review
Today we're going to take a look at the replacement aluminum gearbox for Stromberg Carlson landing gear. This will replace a damaged aluminum gear box on your tandem landing gear with this part from Stromberg Carlson. It is designed for use with the Stromberg Carlson LG1 and LG183708 landing gear, but it will also work with other brands of landing gear, including Atwood, Lippert, and Venture. This is constructed of a durable, rust-proof aluminum. Just to give you some measurements on this, the widest point this way is going to be right at five and a quarter inches, the widest point this way is going to be right at about six and one eighth inches, and the widest on the aluminum gear box itself is about seven eighths inches. Another measurement, if you measure rod to rod, to the end of each rod, you're looking at right at about seven inches. That should do it for the review of the replacement aluminum gear box for Stromberg Carlson landing gear.
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Arrived Damaged
Customer Reviews
Replacement Aluminum Gearbox for Stromberg Carlson Landing Gear - LG-179015
Average Customer Rating: 4.9 out of 5 stars (132 Customer Reviews)
Replaces the damaged aluminum gearbox for your Stromberg Carlson landing gear (LG-1, LG-2, LG-3, LG-4, or LG-183708).by: Aristides05/07/2024
Perfect drop in component, exact match for my unit! Brittany was a great resource.
by: John03/03/2015
This Aluminum landing gear box is the best, heavy duty looking, the original was made of plastic and cracked. I still need to install the new gear box and I will give you an up data after installation. Thanks George for the emails and fast shipping. The photo is of my old gear box that has cracked at the bottom.
by: Brent Hall03/08/2015
This product is exactly the same as my stock one except it's made out of aluminum and a lot stronger. Easy to install - 5 screws and a cotter pin.
by: Ray R 07/02/2016
This replacement gear box was a perfect fit for my original. In order to remove the old gear box the shaft will require rebutting. The new gear box fit the shaft with no problem.
by: Troy H02/25/2017
Works exactly as needed, installed very quick thanks in part to a you tube video. This part was 30$ cheaper then the plastic replacement and what should of been used by manufacturers.
by: Bill11/02/2020
Very pleased with your service and sales person. Will remember where to purchase replacement parts.
by: Malaqua11/30/2016
Exact match for what came off my 5er except this one was metal and not missing a corner. Unbelievable that the factory would use a cheap lightweight plastic piece of garbage to do a high-torque job but this is the perfect replacement. Now I just need to remove each landing gear leg and clean, lube , and/or replace parts as necessary to prevent trashing my new gearbox. Another factory fallacy: lifetime lubrication. Hah! Everything mechanical needs lube and your landing gear is no exception. My only complaint is I paid for 3-day shipping but didn't realize it was 3 business days and received my gearbox 8 days later because of a weekend and the TG holiday. No one's fault but my own, live and learn.
by: Jeff Landers Henderson, NV03/11/2013
I purchased this to replace the "composite", read junk plastic gearbox from Atwood. My local RV stores wanted $100 for the junk plastic one. One store said they can't keep them in stock ever since Atwood changed them from metal to "composite" read cheap plastic. I found this aluminum gearbox to be sturdy and an exact replacement for the existing one. Where the plastic one would flex and the gears would slip when lifting my 16,000 trailer, this one is sturdy and just works. Thanks for a cost effective replacement.
Jeff L.
3/11/2014
While I have not used the trailer a great deal, the product does seem to be working as designed. Thank you for the follow up.
Garry
8/11/2014
Wow was that ever easy and simple to install new Geary on front legs Thanks
by: Mike C.10/16/2015
The gearbox I ordered arrived in good shape. Andrea made sure I had the right one before purchasing, and it was an exact match for my broken gearbox. The product arrived on time, and helped me get my camper back on the road. Though the the gearbox in the picture (and my broken gearbox) are black, the one I received was not painted. Hardly an issue, but thought it was worth mentioning. Thanks etrailer, great service again!
Mike C.
10/17/2016
Its been a year and the gearbox is holding up well. I think in this instance the best compliment I can give is that I dont ever think about the gearbox when running the landing gear in and out. This repair forced me to learn how to gain achess to the leg bevel gears and where to apply grease. Armed with this knowledge, I expect my new gearbox to provide many more years of service.
by: Tim O04/28/2014
Excellent service and the advice of the tech, Michael, was outstanding. He gave me several options I could use to replace my gear box. I am currently trying to resolve a continuing problem with my landing gear and will use this service again and for any future issues. Thank you for all your help.
Tim O.
4/29/2015
I could not be happier with how my new landing gears are performing. The landing gears are continuing to perform like new. I will definitely use etrailer again for any parts I might need. They are on my favorites list for quick and ready access.
by: Michael 09/22/2022
The gearbox installed and operates as expected.
I ordered the aluminum housing gearbox to replace a plastic one that broke. The aluminum is expected to be much more durable.
by: Randy W06/16/2019
Spoke to William B. at e-trailer and told him my landing gear was skipping or jumping sometimes as I raised the 5th wheel up. I had already put a new electric motor on because the other got hot quickly. William diagnosed the problem as the gearbox. He sent one out quickly as I had plans the next weekend. After I put the gearbox on it, I raised it several times and it works great. Thanks William and e-trailer for your help and quick processing.
by: Josh 09/26/2019
Installed this on my 2008 Montana Mountaineer. Installation was a direct replacement. No issues worked great! I installed the upgraded electric motor as well between them both I am able to lift the 5th wheel higher and get it on my truck.
by: Brian in Farmington NM06/25/2019
I would like to complement the folks at etrailer for a job well done.
I recently purchased two gearboxes # LG-179015 and a motor # LG-196308 for my Keystone Cougar fifth wheel.
Your people were very helpful at helping me be sure I was ordering the correct parts and got them to me in just 3 days, and the prices were extremely fair.
Installation was a piece of cake and it works better now than when it was new.
I have purchased from etrailer before and will continue to do so in the future, definitely a " one stop shop " for trailer parts.
Thanks for everything !
by: Wayne06/22/2019
I contacted three local trailer parts supplier trying to order A landing gear gearbox for my fifth wheel trailer. No luck, never had enough information for them. Call etrailer And talked to Will who knew exactly what I needed. Receive the part had it on in no time and was back in business. Outstanding job well thank you.
by: Brett B.05/30/2017
Called looking for a new part for an old trailer. Rep was very helpful through the process and took the time to talk to one of the techs to determine if the new part would fit my 5th wheels landing jacks. Part arrived quickly and installed with no issues. I will shop here for now on.
by: Jerry04/13/2017
One week ago my 5th wheel landing gear broke. Today it is up and running thanks to Etrailer. I would not have been able to do it without the help from Lisa, Jennifer, Jameson , John and others through emails and half a dozen phone calls for technical help. I will definitely buy from etrailer again. Replaced both legs, cross-shaft, and gearbox.
by: Bruce 04/16/2021
Were hearing an issue with one of our Lippert Ground Control 2 leveling jacks. This went away after cleaning and reassembly but decided to get a gear box on hand as it will fit any of the 4 jacks.
Could not find the gear box on ET but Lori B., our sales associate, was able to find the correct part using the Lippert part number. She is great and very helpful. This is an aluminum housed unit instead of the plastic housing used originally. Wish ET sold the bushing (nut) and screw that hold the motor and gear box onto the leg.
by: Tim12/11/2020
This was a direct replacement for my damaged plastic gear box. I have a 2011 Forest river Wildcat 5th Wheel. I did have to take a 1/4" off of the gear box retaining collar to line up the screw. Resolved my problem, which was the small gear had teeth missing and would bind under load, tripping the 30 amp fuse. Thanks for the reliable service and informational videos.
by: Erp07/11/2020
To date i haven’t experienced any issues at all. The motor has good power for raising my 5th wheel each time it is needed.
by: Kenneth06/21/2019
Good fit. Big upgrade over the plastic gearbox. Only issue was minor, that the shaft spacer needed to have a little shaved off to fit. The thickness of the metal housing is a smidge larger. Other than that, works great!
I paired it with a 6500lb motor for max efficiency.
by: B08/07/2015
Etrailer came through again right on time....as always service was fast...gearbox showed up right on time.... got it installed haven't used it yet ...it's an exact match for vmc940rb. (Venture mfg).....lg.179015 by sttimber carson ...fit like a glove . Took less than 10 minutes to install..
by: Beaty02/21/2020
Install was easy and the gear box is working flawlessly. Replaced the old plastic bodied gear box that broke in half. Also took the opportunity to lube up the jack gears and screws while things were apart. The system is running smooth now.
by: Dan05/08/2016
Installed great and fixed the problem. Then my trailer was totaled. But it worked great for that one trip.
25
132
Show More Reviews
See what our Experts say about this Stromberg Carlson Accessories and Parts
- Replacement Landing Motor for RV with ADTH Landing GearTo replace the ADTH motor on your landing gear the Stromberg Carlson # LC196308 will work perfectly. This motor is rated for 6,500 pounds like your existing unit. For a gear box replacement you'd want the # LG-179015 if this was needed as well.
view full answer... - Recommended Gearbox for Fleetwood Quantum 5th Wheel 375RLQS Landing GearThough it will depend on the brand of landing gear you currently have, the Replacement Aluminum Gearbox for Stromberg Carlson Landing Gear # LG-179015 will most likely be the best replacement we have. The # LG-179015 will fit Stromberg Carlson landing gear ( # LG-1, # LG-2, # LG-3, # LG-4, or # LG-183708) as well as most other brands of landing gear, including Lippert, Venture, and Atwood.
view full answer... - Is There A Difference Between Replacement Gear Boxes for Venture Landing GearApart from the manufacturer there is no difference between the Lippert Replacement Gearbox # LC276602 and Stromberg Carlson Replacement Gearbox # LG-179015. Either will work as a replacement for your Venture gear box. I've added links to video reviews for both for you to check out.
view full answer... - Do I Need A Support Jack To Replace A Gearbox For My 5th Wheel TrailerIf you can level your trailer it is not necessary to add an additional support jack before removing your gearbox. The gearbox turns the screw that activates the jack, but it also has a fail safe that does not allow the jack to drop if the gearbox is removed. In the case you are not able to level your trailer, you will need an additional support jack. I have included links to our stabilizer jacks and gear boxes below.
view full answer... - Replacement Motor for Atwood 45-1605Based on my research the Atwood number you listed refers to the gearbox. The Stromberg Carlson equivalent to this (Atwood components are no longer available) is the part # LG-179015 and the corresponding replacement motor is the part # LG-196308. These will both work great as replacements for your Atwood Landing Gear system.
view full answer... - Stromberg-Carlson Landing Gear Can Barely Raise Forrest River Toy Hauler Off of HitchThere is no alternate gear box available but you may be able to install a second motor and switch, # LG-217884, so that each motor is only doing half the work. This will help the motors to last longer and should raise the trailer a little faster. You may also want to check the battery the motor is pulling from. If it is weak then that would affect the motor performance. Any auto parts store can test a battery for you. If you get a second motor, you will also need to replace the follower...
view full answer... - Troubleshooting One Leg on Landing Gear Not WorkingAlthough you did not mention if it is the lead or follow leg that is not working, if it is the follow leg it may be that you have an issue with the gearbox and would need to replace it with Replacement Aluminum Gearbox # LG-179015 which will work with Stromberg Carlson landing gear as well as Lippert and Venture. Another option that could work is using a repair kit such as the Lead Jack Repair Kit for Stromberg Carlson Landing Gear # LG-146059 or Follow Jack Repair Kit # LG-146060 depending...
view full answer... - What is the Difference Between the Stromberg Carlson # LG-179015 and Lippert Components # LC276602The Stromberg Carlson # LG-179015 and the Lippert Components # LC276602 replacement gear boxes are actually identical. The price difference is just because they come from different manufacturers who price them separately.
view full answer... - Landing Gear for Keystone MontanaYour Keystone Montana is unique in that this is one of the rare trailers that actually has specific landing gear replacements that you will need, and are only available as individual parts (note: the cross shaft is not available as a replacement part): - Replacement Lead Leg for Keystone Montana 5th Wheel Landing Gear # LC178653 - Replacement Follow Leg for Keystone Montana 5th Wheel Landing Gear # LC178652 - Lippert Components Venture 5th Wheel RV Landing Gear Motor # LC142178 - Replacement...
view full answer... - Replacement Landing Gear Motor for 1-065-041012The correct replacement motor would be the Lippert # LC141893 which is also a 7140 rpm motor. If you want to swap out the gearbox as well, use part # LG-179015. I'd also suggest trying to manually operate the legs to make sure they're not bound up. Keep in mind, the motor and landing gear only need to lift the pin weight of the trailer, not the entire weight. Much of the weight will be supported on the trailer's back axle(s). The motor's 5000 lb capacity is more than enough to handle...
view full answer... - Correct Replacement Gear Box for Lippert Fifth Wheel Landing GearThe correct gearbox for your Lippert landing gear is part # LC276602. The gear box is compatible with a connecting rod with a 'D' shaped pin. I've linked you to a video showing how all the parts fit together, I hope you'll find it helpful.
view full answer... - Replacement Lead Leg and Gear Box for Venture Landing GearThe part numbers you have provided indicates that the landing gear is a Venture system. For a replacement 33-1/2 inch lead leg use # LG-177202. For the gear box use # LG-179015. Current pricing is available on the product pages.
view full answer... - Replacement Landing Gear Motor And Gearbox For 2009 Holiday Rambler I reached out to Lippert and they confirmed my thoughts that the gearbox is most like bad since you are having trouble with the manual jack. That surely could have caused the motor to burn out. For a replacement, I recommend the Lippert Components Venture 5th Wheel RV Landing Gear Motor # LC142178 along with the Replacement Aluminum Gearbox for Stromberg Carlson Landing Gear # LG-179015.
view full answer... - Replace Landing Gear Motor for Model 1A065012-01-01For your landing gear motor, model number 1A065012-01-01, you need Replacement Motor # LG-142178. If you need a replacement gearbox the part is # LG-179015.
view full answer... - Which Gear Box Replacement for Venture 940RB-341955 Landing Gear MotorFor your 2008 Keystone Challenger with the Venture 940RB landing gear motor you can replace the gear box with either # LC276602 or # LG-179015. Either one will work but the Lippert one is has a plastic casing where the Stromberg Carlson gear box has an aluminum casing.
view full answer... - Replacement Gear Box Recommendation for a 2014 Open Range 337 RLS with Lippert Landing GearIt sounds like you have broken the gear box of the powered landing gear you have on your 2014 Open Range 337 RLS. If the motor is still functioning and turning the input side of the gear box but the output side isn't turning then the # LG-179015 that you referenced would be the correct replacement part to use.
view full answer... - Troubleshooting Slow and Weak Landing Gear on 2008 Keystone Everest 5th Wheel TrailerThe motor very well might need to be replaced on your 2008 Keystone Everest 5th Wheel Trailer, but there are a few other possible reasons for its slow operation that I recommend checking first. A slow and weak motor can also be caused by low battery voltage. Check to make sure your trailer battery is in good working order and fully charged. The fact that it is tripping the breaker can also indicate this as the primary cause, as the motor is having to draw more power than what the breaker...
view full answer... - How To Find Replacement Landing Gear Legs for a 1997 Fleetwood Prowler 5th WheelIn order to replace the landing gear legs on your 1997 Fleetwood Prowler I would need you to take two quick measurements of your existing landing gear legs, the outer tube length and weld stop spacing. I have attached a photo to assist. The most common replacement landing gear legs are the Replacement 5th Wheel RV Landing Gear Legs part # LC179013 for lead and part # LC179014 for follow. These measure 29-1/2" on the outer tube and 15-1/2" between the weld stops. For the gearbox, you can...
view full answer...
- Electric Landing Gear Motor for Landing Gear with ADTH MotorTo replace the ADTH motor on your landing gear the Stromberg Carlson # LC196308 will work perfectly. This motor is rated for 6,500 pounds like your existing unit. For a gear box replacement you'd want the # LG-179015.
view full answer... - Replacement Venture Lippert Motor Gearbox For Landing Gear on a 36 Foot 2006 Raptor Toy HaulerThe replacement gearbox I recommend for your 36 foot 2006 Raptor trailer is # LG-179015. It is designed to work with landing gear # LG-1 and # LG-183708 but also works with most other brands of landing gear, including Atwood and Lippert, and on your Raptor trailer. The replacement motor for your landing gear you will need is LG-142178.
view full answer... - Replacement Motor for Landing Gear with 1A-065012-02-01 MotorThank you for the picture. If your legs are working fine, it is possible that the motor is bad and pulling too much power causing the fuses to pop. The correct replacement motor for your 1A-065012-02-01 is the Replacement Motor for Stromberg Carlson Electric Landing Gear # LG-142178. We also have the Replacement Aluminum Gearbox for Stromberg Carlson Landing Gear # LG-179015 should you need to replace the gear box as well.
view full answer...
- Replacement 5th Wheel Trailer Landing GearYour part 125340 refers to a Stromberg Carlson landing gear kit. In case you want to service this unit we do offer the replacement motor # LG-142178 and replacement gear box # LG-179015. For an upgrade I suggest the dual-motor 12K-rated Ultra-Fab kit # UF17-943010 or the similar 8K-rated Reese # RP500708. Both provide 36-inches or more of lift. A highly-rated dual-motor system will work with less strain and should provide trouble-free service for a long time.
view full answer... - Does the Motor and Switch Kit for Stromberg Carlson Landing Gear Include a Mounting BracketThe Motor and Switch Kit for Stromberg Carlson Landing Gear # LG-217884 mounts to the gear box like the Replacement Aluminum Gearbox for Stromberg Carlson Landing Gear # LG-179015 on your landing gear. It does not come with a mounting bracket. I have included a picture that shows how the Motor and Switch Kit for Stromberg Carlson Landing Gear # LG-217884 would be mounted.
view full answer...
- Metal Gear Box Recommendation for Atwood Fifth Wheel Trailer Landing GearWe have just what you need. The aluminum gear box # LG-179015 is a metal gear box that will fit your Atwood landing gear and work well.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Installed by:
Jeff D
Installed by:
Randy B
Video Edited:
Jacob T
Updated by:
Wilson B
Updated by:
Mike S
Video by:
Zach D
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Malaqua
12/9/2017
The gearbox worked perfectly and is what the factory should be putting on when new but you know how that goes. I have since sold my trailer but the gearbox was working as it should. I ended up replacing one landing gear leg should have replaced both but the gears were in fine shape that caused the problem with cracking the original gearbox and since then had no more problems. Thank you for caring enough to send this email, as I know customer service agents are busy and most companies just dont take the time to reach out to customers after the fact. I have learned that etrailer is the premier site to go to for trailering issues and have used your site for wiring problems and mechanical issues alike. Thank you for providing the rv customer with a great resource to go to for much needed info and parts. I have and will continue to recommend your site to those in need.